Tool

Printer

ANYCUBIC MEGA-S 　

The maximum size of the part is 80cm x 80cm, so I think it can be reproduced with a printer like Monoprice Mini Delta V2 (diameter 110cm x height 120cm).

Filament

PLA is recommended.

PLA

ANYCUBIC PLA　

Ultimaker Cura 4.12.1  “Generic PLA” Default Setting + Support and Skirt enable :

  • Layer height 0.2mm
  • Infill density: 25%
  • Infill pattern: Grid
  • Printing temperature: 200 °C
  • Initial Printing temperature: 210 °C
  • Bed Plate temperature: 60  C
  • Cooling fan speed: 70%
  • Support + Skirt Enable

 

PETG

PETG  

Cura (4.9.1) settings　(For your reference)

  • Nozzle (printing) temperature: 240 ° C
  • Bed (build plate) temperature: 70 ° C (probably thanks to glue stick)
  • Infill density: 20%
  • Infill pattern: Gyroid
  • Layer height: 0.2mm
  • Initial layer height: 0.3mm
  • Pullback distance: 3mm
  • Cooling fan speed: 50%
  • Support pattern: zigzag

 

3D software

  • Autodesk Fusion 360　

Drill

  • 1.0mm, 2.0mm, 3.0mm Pin Vise Hand Drill

Screwdriver

  • #0 Screwdriver
  • #1 Screwdriver

USB Cable